Utility Video Upscale

在 Utility Video Upscale 中使用 Wan2.2 將影片放大成更清晰、更高解析度的輸出,並精準控制細節、降噪強度與尺寸參數。

Input

A short clip to upscale; only the first frames (see Frames) are used.

Match the shape of your clip; the frames are cropped to fill it.

How many frames from the start of the clip to upscale (48 is 2 s at 24 fps).

Megapixels of the upscaled video; 2.1 MP is about 1920×1080.

Advanced settings

How much detail the Wan pass repaints; higher adds detail but drifts from the original.

Default: 0.25

Guides the detail the refine pass adds.

Leave empty for a new result each run. Enter a number to repeat one.

Output
00:00
Example

試試範例

關於此工作流程

Utility Video Upscale 是一個精簡的 ComfyUI 流程,用 Wan2.2 放大節點(自訂節點 ID 8c62a455-6744-43c8-9352-543905ed4db7)把偏糊、低解析度的片段轉成更清晰、更高解析度的影片。流程很直接:LoadVideo 匯入來源,GetVideoComponents 讀取 FPS、幀數等中繼資料,ResolutionSelector 讓你選擇有效的目標尺寸(寬與高需可被 64 整除),並提供常見格式的預設,例如 Full HD(約 2.1 MP)與 4K(約 8.3 MP)。Wan2.2 節點負責主要處理,提供實用的降噪強度與細節控制,讓你在去雜訊與保留紋理之間取得平衡。

為了方便檢視與迭代,工作流程包含 Before vs After Comparison 群組:使用 ImageFromBatch 選取單幀,再用 ImageStitch 產生左右對照合成圖,讓你在完整跑批前先把設定調到位。確認效果後,CreateVideo 會以選定解析度重建影片(通常使用 GetVideoComponents 傳入的來源 FPS),再由 SaveVideo 寫出結果。由於 Wan2.2 每次運行可處理的幀數有限(約最多 121 幀)且受 VRAM 影響,這個流程以可預期、記憶體友善為目標設計,同時提供對放大尺寸與主觀銳利度的精準控制。

問答