Wan VACE控制影片

使用Wan VACE透過控制輸入影片和參考圖像產生影片。

Input

The motion to follow, e.g. a pose, depth or edge video.

Describe the subject, the action and the scene.

The character or subject that should appear in the video.

In steps of 16.

Default: 720

At 16 fps, 81 frames is about 5 seconds. Use 4n+1 values.

In steps of 16. The 14B model supports 480p and 720p.

Default: 720

Advanced settings

1 with the CausVid LoRA; about 6 without it.

Default: 1

Frames per second.

Default: 16

Speed LoRA; 0.3 to 0.7 works best.

Default: 0.3

What to avoid.

Leave empty for a new result each run. Enter a number to repeat one.

4 with the CausVid LoRA; about 20 without it.

Default: 4

How closely the video follows the control video.

Default: 1

Output
00:00
Example

試試範例

關於此工作流程

Wan2.1 VACE Control Video 是一個引導式影片轉影片工作流程:在保留來源影片的動作以及時間節奏的同時,透過文字提示與參考圖片進行重新風格化或重新角色化。它會透過 UNETLoader 與 VAELoader 載入 Wan2.1 VACE checkpoints(1.3B 或 14B),用 CLIPTextEncode 編碼文字,並以簡單的影像前處理(預設為 Canny)產生的控制訊號來做條件設定。GetVideoComponents 會從輸入片段讀取畫格以及 FPS,TrimVideoLatent 會在取樣前依你選擇的畫格範圍與解析度,保持潛空間序列對齊。

在內部流程中,ModelSamplingSD3 會為 Wan2.1 VACE 設定預期的取樣器排程,並由 KSampler 對 WanVaceToVideo 組裝出的影片潛空間序列進行去雜訊;該序列會使用你的控制影片、提示以及參考圖片。VAEDecode 會把最終潛空間轉回畫格,CreateVideo 依指定 FPS 組合成影片,你可以匯出 MP4(SaveVideo)或動態 WebP(SaveAnimatedWEBP)。可選的 CausVid LoRA(LoraLoader)可在極低步數下加速或穩定動作,但可能需要調整強度。14B 模型能提供更高保真度(並支援 720p),但更慢且更吃 VRAM;1.3B 版本更快,適合 480p 輸出。

問答