Wan 2.2 5B Fun 제어
포즈, 깊이 및 에지 가이드를 통한 다중 조건 비디오 제어. 실험적 개발을 위한 컴팩트한 5B 크기.
예시 사용해 보기
이 워크플로 정보
Wan 2.2 5B Fun Control은 짧은 클립을 텍스트, 이미지, 레퍼런스 비디오에서 생성하면서, 컨트롤 신호(특히 Canny 노드를 통한 엣지)를 사용해 모션과 구도를 조정하는 방법을 보여주는 컴팩트한 다중 조건 비디오 디퓨전 워크플로입니다. 그래프의 핵심은 Wan22FunControlToVideo 노드로, (CLIPTextEncode에서 가져온) 프롬프트, 선택적 시작 이미지 또는 비디오(LoadImage, LoadVideo + GetVideoComponents), 컨트롤 맵(Canny)을 융합해 시간적으로 일관된 잠재 데이터 시퀀스를 만듭니다. UNETLoader는 wan2.2_fun_control_5B_bf16.safetensors 디퓨전 모델을 로드하고 VAELoader (wan2.2_vae) 및 CLIPLoader와 페어링합니다. 샘플링은 KSampler이 담당하며, ModelSamplingSD3를 사용해 Wan 2.2의 스케줄러에 맞춥니다. VAEDecode는 잠재 데이터를 프레임으로 변환하고, CreateVideo는 프레임을 클립으로 패킹하며, SaveVideo는 최종 파일을 저장합니다.
기술적으로 워크플로는 Step1 - Load models, Step 2 - Start_image, Step3 - Prompt, Step 3 - Control video and video preprocessing처럼 명확한 그룹으로 구성되어 있습니다. 엣지 가이드는 Canny 노드(낮은/높은 임계값)로 준비한 뒤 Wan22FunControlToVideo로 전달되어 구조와 모션을 고정합니다. PreviewImage로 중간 프레임을 미리본 다음 CreateVideo 및 SaveVideo로 결과를 확정할 수 있습니다. Wan 2.2 Fun Control은 깊이 및 포즈 등 여러 조건을 지원하지만, 이 템플릿은 기본값으로 엣지 컨트롤만 연결되어 있습니다. 필요하면 깊이/포즈 노드를 추가하고 출력값을 Wan22FunControlToVideo로 라우팅해 확장할 수 있습니다. 참고: 5B 파라미터 규모인 Wan 2.2 Fun Control은 속도와 접근성을 위해 충실도를 일부 희생합니다. 디테일이 더 부드럽게 나올 수 있으므로, 강한 컨트롤 신호, 단순한 장면, 짧은 클립에서 결과가 더 좋습니다.
질문과 답변
Wan 2.2 Fun Control uses a 5B-parameter model prioritized for compactness and experimentation. Improve perceived quality by keeping scenes simple, using strong and clean Canny edges, reducing clip length, increasing sampling steps moderately (e.g., 20–30), and lowering CFG (3–6) to reduce oversaturation and noise.
Yes, the model supports multiple conditions. This template wires Canny by default; to use depth or pose, add appropriate nodes (e.g., a depth estimator or a pose detector) and feed their outputs into the corresponding inputs of Wan22FunControlToVideo.
The model was trained with clips at 24 FPS and up to around 121 frames. Matching 24 FPS and keeping clips short (2–5 seconds) generally yields more stable motion and fewer artifacts with this 5B model.
Load your source via LoadVideo, route it through GetVideoComponents to preserve fps and frame order, and generate a clean edge map with Canny. Increase control strength in Wan22FunControlToVideo if available, and lower CFG to reduce hallucinations. Using a fixed seed helps with reproducibility.