Wan 2.2 5B Fun Control

基於姿態、深度和邊緣引導的多條件影片控制。緊湊的5B尺寸,適用於實驗性開發。

Input

A pose, depth or edge (Canny) video that sets the motion and layout, frame by frame.

Describe the subject, style and motion.

The video starts on this image; match its layout to the first frame of the control video.

Output height. Use the control video's shape.

At 24 fps, 121 frames is about 5 seconds. Use 4n+1 values.

Output width. Use the control video's shape.

Advanced settings

How closely to follow the prompt.

Default: 5

Frames per second of the saved video.

Default: 24

What to avoid.

Leave empty for a new result each run. Enter a number to repeat one.

More steps add detail but take longer.

Default: 20

Output
00:00
Example

試試範例

關於此工作流程

Wan 2.2 5B Fun Control 是一個精簡的多條件影片擴散工作流程,示範如何用控制訊號(尤其是透過 Canny 節點取得的邊緣)來引導動作與構圖,同時從文字、圖片或參考影片產生短片。圖形核心是 Wan22FunControlToVideo 節點:它會把你的提示詞(由 CLIPTextEncode 產生)、可選的起始圖片或影片(LoadImage、LoadVideo + GetVideoComponents),以及控制圖(Canny)融合成時間上連貫的 latent 序列。UNETLoader 會載入 wan2.2_fun_control_5B_bf16.safetensors 擴散模型,並搭配 VAELoader(wan2.2_vae)與 CLIPLoader;取樣由 KSampler 驅動,並透過 ModelSamplingSD3 對齊 Wan 2.2 的 scheduler。VAEDecode 把 latent 轉回影格,CreateVideo 將影格打包成影片片段,SaveVideo 負責寫入最終檔案。

在結構上,此工作流程分為清楚的群組:Step1 - Load models、Step 2 - Start_image、Step3 - Prompt,以及 Step 3 - Control video and video preprocessing。邊緣引導由 Canny 節點(low/high thresholds)準備,並送入 Wan22FunControlToVideo 以錨定結構與動作。你可以用 PreviewImage 預覽中間影格,然後用 CreateVideo 與 SaveVideo 定稿。雖然 Wan 2.2 Fun Control 支援多種條件(例如深度與姿勢),此範本預設接的是邊緣控制;你可以再加入 depth/pose 節點,並把輸出接到 Wan22FunControlToVideo 來擴充。注意:由於只有 5B 參數,Wan 2.2 Fun Control 會以保真度換取速度與可用性——細節會偏柔;建議使用更強的控制訊號、較簡單的場景以及較短的片段以取得較好結果。

問答